Acetarc Engineering design, manufacture and install a complete range of Monorail Systems to provide a cost effective and efficient handling systems. This can be from a simple fixed line or loop between two points, or a system incorporating.
Bends--- Junction--- Turntables--- Lift/lower Section--- Weighing Sections.
They can be powered via electrical Bus-bar systems moving loads up 20,000kg, or manually operated for lighter loads; these loads can be moved with the minimum of effort.
This is achieved by using the T.C./American Monorail Inc. Track Section and components.
Acetarc Engineering Co Ltd. Are the exclusive authorised U.K. and European dealers for TC/American Monorail Inc.
|
|
|
Example of a 5 Ton powered High level Monorail incorporating a powered 90 degree junction bend being erected. |
Heavy duty powered Monorail Note the Bus-Bar running along the top edge of the beam section |
|
|
|
|
Typical example of pneumatically powered Y junction on the same bag handling plant to provide 2 dedicated lines to the storage area. |
Bag handling 1 Ton capacity powered Monorail |
|
|
|
|
The picture above shows a pneumatically operated lift/ lower section, this is ideal for transferring loads to other Monorails at different levels, or lowering a load down on to the ground, a pallet or other handling device. |
The picture above shows part of a casting loop, this features a pneumatically operated junction. This allows different section of Monorails to be linked together with loads being able to be freely transferred from one line to another simply and efficiently. |
|
|
|
The picture above shows an inline track mounted weighing station complete with digital read-out incorporating tare facility. |
A Powered Turntable allowing various options through to other Monorail sections. |
